Group Info

• Troubleshooting Method for Rubber Extruder Machine Business & Finance
• Troubleshooting of rubber extruder machine:
  1. Due to the low air or oil pressure, the automatic screen changer of the rubber extruder will be slow or even inoperable. In addition, the air and oil leakage of the cylinder and the hydraulic station...  moreTroubleshooting of rubber extruder machine:
  1. Due to the low air or oil pressure, the automatic screen changer of the rubber extruder will be slow or even inoperable. In addition, the air and oil leakage of the cylinder and the hydraulic station will also cause this problem. . Facing this kind of problem, the relevant operators need to check the sealing condition of the power system of the screen changer and the air cylinder or hydraulic cylinder to avoid the recurrence of this kind of problem.
  2. When the torque of the extrusion system of the rubber extruder is too large and the main motor and the input bearing are not connected together, the safety pin or safety key of the rubber extruder may be cut off. At the same time, firstly check the preheating time and observe whether the heating value meets the requirements. Secondly, check the extrusion system to observe whether the screw is stuck by metal or other objects.
  3. In the daily work of the rubber extruder, sometimes the extrusion...    less
• • na bai (owner)
• • 499 total views
  • 1 total member
  • Last updated November 20, 2020