Member Info
- Profile Type: Regular Member
- Profile Views: 637 views
- Friends: 0 friends
- Last Update: Feb 2
- Joined: March 3, 2020
Updates
The post was not added to the feed. Please check your privacy settings.
-
fitting tony created a new group:1. When purchasing Pe Fittings, plastic fittings factory suggests you to choose the pressure degree according to the current tap water pressure, generally 1.6MPA, 2.0MPA, Pe fittings pipe wall thickness is 2.3, 2.8, 3.5, 4.4MM, etc., not the higher the... more1. When purchasing Pe Fittings, plastic fittings factory suggests you to choose the pressure degree according to the current tap water pressure, generally 1.6MPA, 2.0MPA, Pe fittings pipe wall thickness is 2.3, 2.8, 3.5, 4.4MM, etc., not the higher the pressure, the greater the thickness Just fine, it's actually enough. Because the pressure of tap water as we know it is the pressurized value when it leaves the factory, the pressure will be greatly reduced if it really flows to your home. We often see ruptures of water supply pipes on roads, but it is usually not caused by too much pressure, but caused by vehicle pressure loss and aging water pipes. Generally speaking, the pipe wall of 2.3 or 2.8, 1.6MPA pressure suggested by Pe fittings Factory is enough for household use.
2. Water pipe distributors often offer discounts, usually 6-6.5% off, etc., but it should be noted that distributors only sell water pipes at a discount, and accessories such as elbows, tees, valves, etc., are rarely discounted. Or... less- Feb 2
- fitting tony created a new group:The pp compression fitting is user-friendly, easy to install and have many purposes. These fittings aren’t normally used in new constructions but renovation projects. The pp compression fitting are ingenious because you can use them in places where... moreThe pp compression fitting is user-friendly, easy to install and have many purposes. These fittings aren’t normally used in new constructions but renovation projects. The pp compression fitting are ingenious because you can use them in places where welding isn’t an option. Also, compression fittings can be used on leaky pipes such as broken water lines in an emergency situation.
Step 1: A PP COMPRESSION FITTING
Alright, these fittings are composed of 3 parts, the valve in this case, a sleeve and a retainer nut. All of these work together to make a solid leak free connection.
Step 2: TOOLS/MATERIALS FOR THE JOB
You’ll be needing some tools and materials to install these the correct way, starting with either 2 open end wrenches the size of the retainer nuts or 2 adjustable wrenches, and I always like to install a bit of pipe dope to lubricate and seal my connections, so I’ll be using my trusty can of pipe dope.
Step 3: PREPPING THE PIPE/FITTING
So the first thing to do is to ensure that you... less- Jan 26
- fitting tony created a new group:1. No Need for Specialised Tools with Push-Fit Plastic Plumbing
Gone are the days when the plumber’s toolbox is heavier than their van. With plastic, plumbers and installers can arrive for a job with considerably less weight to carry, since fewer... more1. No Need for Specialised Tools with Push-Fit Plastic Plumbing
Gone are the days when the plumber’s toolbox is heavier than their van. With plastic, plumbers and installers can arrive for a job with considerably less weight to carry, since fewer specialist tools are required to install plastic fittings.
Unlike press fit methods of plumbing, plastic push-fit fittings introduced by plastic fittings factory require no tools at all for installations. Once cutting, measuring and deburring of the pipes has been completed, you only have to twist and lock the push-fit fitting to make the connection. In contrast, copper pipes and fittings require the use of a soldering iron, spanners, PTFE tape, and other items that can weigh down the toolbox.
2. Improve The Value of New Builds with Plastic Plumbing Fittings
New building developments are increasingly specifying plastic over copper for first fix plumbing, not only for ease of installation but because plastic can increase the value of a property over time.... less- Jan 19
- fitting tony created a new group:1. The pp quick connect fitting is processed with new materials, with smooth surface and acid and alkali resistance. Adopt thread water proof design, sealing without water leakage, high hardness. It is composed of multiple parts, which are linked and... more1. The pp quick connect fitting is processed with new materials, with smooth surface and acid and alkali resistance. Adopt thread water proof design, sealing without water leakage, high hardness. It is composed of multiple parts, which are linked and water tight.
2. Convenient connection, easy disassembly, strong flexibility and easy recovery.
3. The specifications are complete. In terms of types, PP compressiong fittings are divided into straight through with equal diameter, straight through with different diameter, straight tee, reducer tee, internal thread tee, external thread tee, elbow, internal and external thread joint, plug, etc. in terms of dimensions, there are basically specifications of Φ 20, Φ 25, Φ 32, Φ 40, Φ 50, Φ 63, Φ 75, Φ 90, Φ 110, which can meet the needs of different construction sites.
4. Working pressure: under the normal temperature of 20 ℃, the product with a diameter of 20-63mm can bear the maximum working pressure of 16bar, and the product with a diameter of... less- December 7, 2020
- fitting tony created a new group:1. The pp quick connect fitting is processed with new materials, with smooth surface and acid and alkali resistance. Adopt thread water proof design, sealing without water leakage, high hardness. It is composed of multiple parts, which are linked and... more1. The pp quick connect fitting is processed with new materials, with smooth surface and acid and alkali resistance. Adopt thread water proof design, sealing without water leakage, high hardness. It is composed of multiple parts, which are linked and water tight.
2. Convenient connection, easy disassembly, strong flexibility and easy recovery.
3. The specifications are complete. In terms of types, PP compressiong fittings are divided into straight through with equal diameter, straight through with different diameter, straight tee, reducer tee, internal thread tee, external thread tee, elbow, internal and external thread joint, plug, etc. in terms of dimensions, there are basically specifications of Φ 20, Φ 25, Φ 32, Φ 40, Φ 50, Φ 63, Φ 75, Φ 90, Φ 110, which can meet the needs of different construction sites.
4. Working pressure: under the normal temperature of 20 ℃, the product with a diameter of 20-63mm can bear the maximum working pressure of 16bar, and the product with a diameter of... less- December 7, 2020
- fitting tony created a new group:The specifications of pp Fittings introduced by PP fitting supplier are Φ20, Φ25, Φ32, Φ40, Φ50, Φ63, Φ75, Φ90, Φ110, Φ125, Φ140, Φ160, Φ180, Φ200, Φ225, Φ250, Φ280, Φ315, Φ355, Φ400, Φ450, Φ500, Φ630, Φ720, Φ800, etc. The... moreThe specifications of pp Fittings introduced by PP fitting supplier are Φ20, Φ25, Φ32, Φ40, Φ50, Φ63, Φ75, Φ90, Φ110, Φ125, Φ140, Φ160, Φ180, Φ200, Φ225, Φ250, Φ280, Φ315, Φ355, Φ400, Φ450, Φ500, Φ630, Φ720, Φ800, etc. The pressures shown in Poly PEX Fittings are all expressed in Mpa. The nominal pressure is specified as 0.63Mpa, 0.8Mpa, 1.0Mpa, 1.25Mpa, 1.6Mpa, etc. 5 kinds. The minimum diameter of the pipe for each pressure zone is specified as: the minimum diameter of 0.63Mpa pipe is 63mm, the minimum diameter of 0.8Mpa pipe is 50mm, the minimum diameter of 1.0Mpa pipe is 40mm, and the minimum diameter of 1.25Mpa pipe is 32mm, 1.6Mpa The minimum diameter of the pipe is 20mm and 25mm. The length of the pipe is generally 4m, 6m, 8m, and it can also be negotiated between the supplier and the buyer.
We are one of the saddle clamp manufacturer and wecome to your come and purchase! less- November 30, 2020
- fitting tony created a new group:The pp compression fitting arrangement should be short and straight. In order to make full use of the water pressure in the outdoor pp pipe network, the water supply pipe is declared to be located at the maximum water consumption or a continuous water... moreThe pp compression fitting arrangement should be short and straight. In order to make full use of the water pressure in the outdoor pp pipe network, the water supply pipe is declared to be located at the maximum water consumption or a continuous water supply.
The indoor water supply main pipe should be close to the maximum water consumption or the continuous water supply is not allowed.
Guarantee production and safety: The position of the pp pipe must not impede production operations, transportation and the use of buildings. Pp pipe shall not be placed on top of water, causing incineration, blasting or damage to materials, products and equipment, and shall be prevented from passing over the production equipment. Pp pipe shall not pass through the shop window, the closet of the civil building and the wood decoration. For workshops and buildings that are not allowed to break water, two sets of introduction pipes shall be provided, which shall be connected in a circular or penetrating two-way water... less- November 23, 2020
- fitting tony created a new group:The speed of making a connection with push-fit fittings is perhaps the biggest advantage. In an emergency, you can quickly cap or repair a pipe by simply slipping on a push-fit fitting. We are one of the plastic fittings factory and would like to give... moreThe speed of making a connection with push-fit fittings is perhaps the biggest advantage. In an emergency, you can quickly cap or repair a pipe by simply slipping on a push-fit fitting. We are one of the plastic fittings factory and would like to give you help!
Push-fit fittings are a great way to make pipe connections without having to solder or use clamps, unions, or glue.
Pipes need not be perfectly dry when using push-fit fittings. This is in contrast with CPVC and PVC, which must be bone-dry before solvent gluing; or copper pipes, which also must be dry before soldering with a torch.
Push-fit fittings are available in various materials for different kinds of applications. Almost all pipe types have corresponding push-fit fittings designed for them.
The product lines for push-fit fittings include many different fittings in a variety of sizes, suitable for just about any application you can imagine.
Push-fit fittings are easily removed so they can be repositioned as needed. If the connection is... less- November 16, 2020
- fitting tony created a new group:A pp compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings... moreA pp compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings will be made of one or more compatible materials appropriate for the connection. Compression fittings for attaching tubing (piping) commonly have ferrules (or olives in the UK) in them.
Compression fittings are also used extensively for hot and cold water faucets (taps) and toilet stop valves; compression fittings are well suited to this application, as these valves are usually located in confined spaces where copper pipe would be difficult to solder without creating a fire hazard. Also, the fittings allow easy disconnection and reconnection.
Compression fittings are popular because they do not require soldering, so they are comparatively quick and easy to use. They require no special tools or skills to operate. They work at higher pressures and... less- November 9, 2020
- fitting tony created a new group:The one-of-a-kind China saddle clamp Making Tool allows you to make strong, reliable clamps out of simple Stainless Steel Safety Wire. It can be used to replace worn or ineffective hose clamps, or to create clamps on virtually any material by tightening... moreThe one-of-a-kind China saddle clamp Making Tool allows you to make strong, reliable clamps out of simple Stainless Steel Safety Wire. It can be used to replace worn or ineffective hose clamps, or to create clamps on virtually any material by tightening wires around an object and locking them in place. Follow these instructions to create your own clamps today!clamptite-beauty.jpg
Single Wrap Application
Step 1
Insert end of wire into front pin on the left side of the tool
Bring wire over the nose and in front of the front pin on the right side of the tool
Wrap wire around hose or object to clamp (as many wraps as desired)
Bring wire over the top of the wraps and around the rear pin on the right hand side
Take wire over the top of the tool and around the pin on the left hand side
Step 1 (Alternative)
Place loop of wire around nose and twist to tighten
Wrap wire around hose or object to clamp (as many wraps as desired)
Bring wire over the top of the wraps and around the rear pin on the right hand... less- November 2, 2020
- fitting tony created a new group:Pe fitting body, lock nut, pipe clamp and V-shaped sealing ring make up our pp compression valve. When we use it, the nut and pipe clamp shall be put on the pipe in turn, and the pipe shall be inserted into the pipe body 4-5cm through the V-shaped... morePe fitting body, lock nut, pipe clamp and V-shaped sealing ring make up our pp compression valve. When we use it, the nut and pipe clamp shall be put on the pipe in turn, and the pipe shall be inserted into the pipe body 4-5cm through the V-shaped sealing ring, and then the lock nut shall be tightened.
If you want to install tubing into a pp compression valve, it is a must that you need to simply insert the tubing through the collet and O-ring, and into the body of the fitting. The only trick is to make sure you have inserted the tubing all the way into the fitting. If you have not pushed your tubing past the O-ring on the inside of the fitting, you will experience a leak because the O-ring is not sealing properly. One way to be sure that your tubing has been inserted all the way is to mark the end of it at about the three-quarter inch line. When you press the two pieces together, the three-quarter inch line should disappear into the fitting.
If you are interested in pp compression fitting, welcome... less- October 26, 2020
- fitting tony created a new group:Mechanical pp compression fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce alignment. There are several materials of compression fittings, such as: Steel,... moreMechanical pp compression fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce alignment. There are several materials of compression fittings, such as: Steel, Brass, Plastic. The most plastic material used is PP, there are also PVC or PE compression fittings.
PP compression fittings are widely used in water supply and irrigation. Kinson compression fittings for HDPE pipe are made by high quality PP material with UV protection, both material and fittings are approved use with drinking water.
We have three different types of PP compression fittings, all comply with standards DIN 8076-3, UNI 9562, UNI 9561, BS 5114/75.
The pp compression fittings can be installed on PE pipes which are in compliance with standards DIN 8072, DIN 8074, ISO 4427, EN 12201. The threaded version is BSP.
Material: PP
Size range: 20-110mm
Working Pressurel: PN16
Color: Black, Light blue, Dark bule
Easy installation.
Welcome to contact... less- October 19, 2020
- fitting tony created a new group:The beauty of the pp quick connect fitting is its simple design. It's comprised of three individual components: a collet, an O-ring, and the body. The body of the fitting conceals the O-ring and collet on either end. Your tubing is meant to be inserted... moreThe beauty of the pp quick connect fitting is its simple design. It's comprised of three individual components: a collet, an O-ring, and the body. The body of the fitting conceals the O-ring and collet on either end. Your tubing is meant to be inserted through the collet, through the O-ring, and into the body of the fitting. These three components create the water-tight seal.
As pressure increases inside of the tubing, the water or air forces the collet into a groove on the inside of the fitting. The grooves compress the collet so that the little teeth on the inside of the collet dig into the tubing, making it virtually impossible for the tubing to disconnect. So, the harder you pull on the tubing, the tighter the collet holds onto it. As the collet continues to hold the tubing in place, the O-ring seals the space between your tubing and the fitting that it is connected to, making it water-tight. The most common reason for experiencing a leak with a quick-connect fitting is that the tubing did not... less- October 12, 2020
- fitting tony created a new group:A pp compression fitting is a type of coupling used to connect two pipes or a pipe to a fixture or valve. It consists of three parts... the compression nut, the compression ring, and the compression seat.
The pipe is slid into the fitting (in this case... moreA pp compression fitting is a type of coupling used to connect two pipes or a pipe to a fixture or valve. It consists of three parts... the compression nut, the compression ring, and the compression seat.
The pipe is slid into the fitting (in this case a toilet shutoff valve) and the nut is tightened down. As the nut is tightened, the compression ring is pressed into the seat, causing it to compress against the pipe and the compression nut, providing a watertight connection.
Though the primary advantage of compression fittings may seem to be in their ease of assembly, their real advantage is in their ease of disassembly! If you look throughout your home, you will see that the use of compression fittings is generally limited to appliances and fixtures that will... given enough time, normal use, and wild beatings with a hairbrush... wear out and need to be replaced. Look under your bathroom vanities, behind your toilets, under your dishwasher or behind your refrigerator... and you will see... less- September 28, 2020
- fitting tony created a new group:As a new type of pipe, homopolymer IPS pipe has obvious performance characteristics. The energy consumption and thermal conductivity of IPS pipe are low. Application in hot water system will greatly reduce heat loss. In the production process of pp quick... moreAs a new type of pipe, homopolymer IPS pipe has obvious performance characteristics. The energy consumption and thermal conductivity of IPS pipe are low. Application in hot water system will greatly reduce heat loss. In the production process of pp quick connect fitting, there are defective products, which can be used again after being broken, which improves the utilization rate of raw materials, reduces the production cost and improves the economic efficiency. Because of its corrosion-resistant, non scaling, sanitary and non-toxic, the use of homopolymer pp quick connect fitting can avoid the use of galvanized. Because the components of pp quick connect fitting are simple and the basic components are carbon and hydrogen, they meet the requirements of food hygiene and are non-toxic, so they are more suitable for drinking water transportation.
In addition, homopolymer IPS pipe fittings have heat resistance and long service life. The long-term service temperature of homopolymer IPS pipe fitting is 90... less- September 21, 2020
Loading ...
Info
Personal Information
- First Name fitting
- Last Name tony
Blogs
-
Install And Remove Quick Connect Fitting In This Way
Posted September 7, 2020
The quick connect fitting is simple to install but require a wrench in most cases. They consist of three components: the sleeve, nut, and fitting body. All components work together to create a watertight seal. To create this seal, you must: Slide the nut onto y...
-
Quick Connect Fitting Works As Such
Posted August 17, 2020
The beauty of the quick connect fitting is its simple design. It's comprised of three individual components: a collet, an O-ring, and the body. The body of the fitting conceals the O-ring and collet on either end. Your tubing is meant to be inserted through the ...
-
Don't Ignore Things Of Quick Connect Fitting
Posted August 11, 2020
In a plumbing system, several pipes and tubing sections are required to be connected to each other for the system to work efficiently. This purpose is fulfilled by pp quick connect fitting, which are specially designed for connecting straight pipe sections, as w...
-
Why Not Try These Essential Pe Fitting Tools
Posted August 4, 2020
Did you know that thousands of dollars in labor are lost every year by companies that continue to use outdated pe fitting and alignment methods? If you want your welding company to maintain a competitive edge, it is important to keep up with the latest measuring...
-
Posted August 3, 2020
Ball valves are designed to moderate high volumes, high temperatures and high pressures. It may be hard to believe that such a simple valve design can accomplish so much, but a closer look reveals just how efficiently and effectively this component functions.bal...
Groups
-
1 member1. When purchasing Pe Fittings, plastic fittings factory suggests you to choose the pressure degree according to the current tap water pressure, generally 1.6MPA, 2.0MPA, Pe fittings pipe wall thickness is 2.3, 2.8, 3.5, 4.4MM, etc., not the higher the pressure, the greater the thickness Just fine, it's actually enough. Because the pressure of tap water as we know it is the pressurized value when it leaves the factory, the pressure will be greatly reduced if it really flows to your home. We often see ruptures of water supply pipes on roads, but it is usually not caused by too much pressure, but caused by vehicle pressure loss and aging water pipes. Generally speaking, the pipe wall of 2.3 or 2.8, 1.6MPA pressure suggested by Pe fittings Factory is enough for household use. 2. Water pipe distributors often offer discounts, usually 6-6.5% off, etc., but it should be noted that distributors only sell water pipes at a discount, and accessories such as elbows, tees, valves, etc., are rarely discounted. Or the discount rate is lower. According to the calculation of one kitchen and one bathroom, and add a water pipe to the balcony, you can use a 15-20m water pipe at most. Even if all the hot water pipes are calculated, the market price is 14 yuan/M with a 40% discount, but the maximum is more than 200 yuan. But the joints, tees and valves would be great if they are not discounted. Water pipes and accessories are like the relationship between ham and straw, so many customers buy water pipes at discounted prices, and the total price is not much cheaper at the end. This is the reason. So be sure to ask, write it down in black and white, and agree that everything, including water pipes and accessories, is a discount before agreeing to the seller to install it. And it must be stated that the settlement is based on the actual materials used. During the construction, it is necessary to pay attention to whether the water pipes brought by the workers are short (that is, leftovers for other people's households). The work can only be started after workers' approval. Pe Fittings should not be too many joints: the inner diameter of the pipe will be smaller if there are more heads, which increases the water resistance, resulting in a decrease in the amount of water per unit time, and more joints are prone to poor connection. Therefore, the water pipe can go straight if it can go straight, and one pipe can be one pipe. If you are not assured, you can do a closed water experiment. The pressure is 0.6MPa for 24 hours, and the pressure does not drop. If you have interests about pp compression valve, welcome to your come and purchase!
-
1 memberThe pp compression fitting is user-friendly, easy to install and have many purposes. These fittings aren’t normally used in new constructions but renovation projects. The pp compression fitting are ingenious because you can use them in places where welding isn’t an option. Also, compression fittings can be used on leaky pipes such as broken water lines in an emergency situation. Step 1: A PP COMPRESSION FITTING Alright, these fittings are composed of 3 parts, the valve in this case, a sleeve and a retainer nut. All of these work together to make a solid leak free connection. Step 2: TOOLS/MATERIALS FOR THE JOB You’ll be needing some tools and materials to install these the correct way, starting with either 2 open end wrenches the size of the retainer nuts or 2 adjustable wrenches, and I always like to install a bit of pipe dope to lubricate and seal my connections, so I’ll be using my trusty can of pipe dope. Step 3: PREPPING THE PIPE/FITTING So the first thing to do is to ensure that you pipe is free of any kinks, debris or just plain old dirt, so get yourself a clean paper towel or rag and clean it off as best as you could. Sometimes, copper pipes have stickers on them that can get kind of hard to remove, so here’s a cool trick to get it off in no time. Grab your plumber’s torch and heat the sticker thoroughly for a couple of seconds, then apply a bit a flux on it, and it’ll disappear with a couple of strokes. Make sure to wipe off any excess flux or it will eat up your pipe. If you do have a kink in your pipe, cut it a couple of inches before or else you run the chance of having a leaky joint. Step 4: PLACE THE FITTING ON Once your pipe is ready, slip on your retainer nut, then the sleeve and finally the fitting. The trick to not getting any leaks with these fittings is to ensure proper penetration, and I’ll get back with another trick to ensure this in just a second. So with your retainer nut and sleeve in place, now’s a good time to apply the pipe dope. Only a small amount is required for it to do its job. Step 5: SECURING THE FITTING The only thing left to do is to tighten the retainer nut. To ensure that the fitting is properly seated, what I like to do is tightening it ever so slightly, then hit the back of the fitting to ensure it’s seated properly, as opposed to hitting it without tightening it, it would bounce back and not seat properly. Once that’s done, go ahead and start tightening it. Your cue for knowing when they are tight enough is when you start to hear a squeaking noise as you are tightening, this is caused by the rotational friction between all the parts inside. Step 6: IT CAN BE INSTALLED WHEN WATER IS FLOWING We are one of the saddle clamp manufacturer and welcome to your come and purchase!
-
1 member1. No Need for Specialised Tools with Push-Fit Plastic Plumbing Gone are the days when the plumber’s toolbox is heavier than their van. With plastic, plumbers and installers can arrive for a job with considerably less weight to carry, since fewer specialist tools are required to install plastic fittings. Unlike press fit methods of plumbing, plastic push-fit fittings introduced by plastic fittings factory require no tools at all for installations. Once cutting, measuring and deburring of the pipes has been completed, you only have to twist and lock the push-fit fitting to make the connection. In contrast, copper pipes and fittings require the use of a soldering iron, spanners, PTFE tape, and other items that can weigh down the toolbox. 2. Improve The Value of New Builds with Plastic Plumbing Fittings New building developments are increasingly specifying plastic over copper for first fix plumbing, not only for ease of installation but because plastic can increase the value of a property over time. You only have to look at JG Speedfit’s work on the Royal Wharf development in London for evidence of this! How? Although when we talk about plastic, we are actually referring to cross-linked polyethylene in regard to fittings, and polybutylene and polyethylene for pipes. These are specially engineered materials which have been specifically designed to ensure robustness over extended periods. They are so strong, they can withstand our internal pressure tests up to 60 bar (although our technical specification still needs to be followed). What that means is that plastic pipes and fittings do not corrode easily and can last a lot longer than those engineered with alternative materials. This can have a significant impact on the overall value of a new build since there is confidence that the plumbing system will not fail. 3. A suitable Plumbing Job Quicker It is generally accepted that plastic push-fit fittings are as much as 40% faster to fit and install than those made from alternative materials. Not only is this because they do not require specialist tooling to fit, but because they are engineered to make the installer’s life easy. For example, the material properties of plastic compared to copper mean that it can be manufactured in different colours for added installation convenience. 4. Quickly Fix Errors with Plastic Plumbing Fittings The beauty of using plastic push-fit fittings for first fix is the fact that an installer can quickly resolve an issue in the event of making an installation error. This is because the fitting is de-mountable, while press fittings and more traditional methods are not. Furthermore, an installer only needs to remove the existing fitting and replace it with a new one, or re-fit, if the pipe is not damaged. There is no need for any additional materials or tooling work. 5. Be Flexible Enough to Accommodate New Building Designs Many modern buildings follow a similar structure to pre-1960’s buildings, which typically had wooden joists in the floor, and floorboards on top. With modern buildings, the joists are specially engineered and therefore more stable than normal wooden joists, but equally difficult to thread a copper pipe through. With plastic, though, plumbers and installers can thread pipework through the joists like cabling systems, and can even hide away unsightly pipework behind walls, to add a more pleasing interior aesthetic. If you’ve ever tried threading a copper pipe through a joist, you’ll know how much easier it is with plastic! We wholesale pp compression valve and welcome to contact us!
-
1 member1. The pp quick connect fitting is processed with new materials, with smooth surface and acid and alkali resistance. Adopt thread water proof design, sealing without water leakage, high hardness. It is composed of multiple parts, which are linked and water tight. 2. Convenient connection, easy disassembly, strong flexibility and easy recovery. 3. The specifications are complete. In terms of types, PP compressiong fittings are divided into straight through with equal diameter, straight through with different diameter, straight tee, reducer tee, internal thread tee, external thread tee, elbow, internal and external thread joint, plug, etc. in terms of dimensions, there are basically specifications of Φ 20, Φ 25, Φ 32, Φ 40, Φ 50, Φ 63, Φ 75, Φ 90, Φ 110, which can meet the needs of different construction sites. 4. Working pressure: under the normal temperature of 20 ℃, the product with a diameter of 20-63mm can bear the maximum working pressure of 16bar, and the product with a diameter of 75-110mm can bear the working pressure of 10bar 5. Low cost and long service life. Compared with the metal pipeline, the project investment can be reduced by about 1 / 3, and under the specified service conditions, it will be more than 50 years 6. PP compressiong fittings are mainly used in high-pressure liquid pipeline, widely used in water flow transmission, drinking water, home gardening, public green space, garden gardening, agricultural production, and hydraulic industry. The product can be widely used in the connection of various water pipes, with remarkable mechanical properties and quality in line with international advanced standards. Welcome to contact us if you are interested in China saddle clamp!
-
1 member1. The pp quick connect fitting is processed with new materials, with smooth surface and acid and alkali resistance. Adopt thread water proof design, sealing without water leakage, high hardness. It is composed of multiple parts, which are linked and water tight. 2. Convenient connection, easy disassembly, strong flexibility and easy recovery. 3. The specifications are complete. In terms of types, PP compressiong fittings are divided into straight through with equal diameter, straight through with different diameter, straight tee, reducer tee, internal thread tee, external thread tee, elbow, internal and external thread joint, plug, etc. in terms of dimensions, there are basically specifications of Φ 20, Φ 25, Φ 32, Φ 40, Φ 50, Φ 63, Φ 75, Φ 90, Φ 110, which can meet the needs of different construction sites. 4. Working pressure: under the normal temperature of 20 ℃, the product with a diameter of 20-63mm can bear the maximum working pressure of 16bar, and the product with a diameter of 75-110mm can bear the working pressure of 10bar 5. Low cost and long service life. Compared with the metal pipeline, the project investment can be reduced by about 1 / 3, and under the specified service conditions, it will be more than 50 years 6. PP compressiong fittings are mainly used in high-pressure liquid pipeline, widely used in water flow transmission, drinking water, home gardening, public green space, garden gardening, agricultural production, and hydraulic industry. The product can be widely used in the connection of various water pipes, with remarkable mechanical properties and quality in line with international advanced standards. Welcome to contact us if you are interested in China saddle clamp!