Auto Parts Factory Introduces How To Use Standard Parts

  •  

    Auto Parts Factory introduces the correct operation method of standard parts:

    (1) The nut must be tightened perpendicular to the axis of the screw and cannot be tilted;

    (2) During the tightening process, the force must be applied evenly, and the force must not exceed the safe torque value (with a safe torque meter);


    (3) Use socket wrenches or torque wrenches as much as possible, and avoid using electric wrenches or adjustable wrenches;

    (4) It must be cooled when used at high temperature. Do not rotate it quickly during use, otherwise the temperature will rise rapidly and cause lock-up (such as electric wrenches, etc.)


    Through the above introduction, Motorcycle Parts Factory hopes that you can simply refer to the content of this article in future use.