Reduce The Cycle Time Of The Armchair Mold From The Design

  • For plastic injection molds, a short cycle time is very important, and it can directly bring benefits. For example: For the Armchair Mould , the cycle time is 45s, and we can produce 80 armchairs in one hour. If we can reduce the cycle time to 35s, 102 armchairs can be produced in one hour, which is 22 more armchairs than the injected 45s cycle time. You can calculate that there are 176 armchairs in 8 hours a day.

    How to reduce the cycle time of armchair moulds? We can consider from 3 ways:

    1. Design: Injection system with hot runner or insulating gate, which can save runner material and cutting runner time;

    Have enough cooling channels to have a good cooling effect, thereby helping to reduce the cooling time;

    Ejection system: first discharge air on the cavity side to keep the bucket on the core side, then slide the slider, and then eject the bucket by the ejector. These 3 actions should take effect quickly, thereby helping to reduce ejection time.

    1. Coating copper beryllium on the top of the core side for better cooling to reduce cooling time, sometimes coating copper beryllium on the top of the cavity side slider.
    2. Suitable for high-speed injection molding machine

    Plastic armchair mould, Basket Mould design, hope SHINE mould will become your armchair mould supplier.