Home wireless network construction panel

  • Home wireless network construction - panel APVS ceiling APVS external omnidirectional antenna AP who should be selected? Many netizens are worried about choosing the home AP. Now the wireless AP on the market mainly has 86 panel type ceiling mounted internal antenna type external antenna type (ceiling mounted or placement mounted). Which one is more suitable for me? Let the author who has rich experience in using wireless AP analyze one by one for you. Before this, first of all, I will popularize the key technology MU-MIMO of 802.11ac WAVE2. First, we will learn to distinguish MIMO from Mu MIMO: MIMO is multi antenna transceiver, as long as the number of Wi Fi equipment antennas is greater than 1, it is MIMO. What multi antenna transceiver brings is rate superposition! 11n's single antenna is 150m, two antennas are 300m, three antennas are 450m but no matter how many antennas there are, there is only one router and only one window!! Just like the figure below: no matter the operator in the here window has two hands, three hands or four hands (hand = antenna), the speed is faster! Every device still has to queue in this window! And Mu MIMO is: the number of antennas in each window remains the same or multiple antennas (MIMO), and multiple windows (MU) are added! MIMO is a multi antenna network speed increase, mu can not improve the speed can only solve the congestion problem of multi devices sharing Wi Fi! Okay, let's get to the pointThe following factors should be considered when choosing a home AP: 1. Price: the price of the mainstream dual band wireless AP is 1XX 2XX 3xx 5xx 7xx 1xxx has different grades and different AP coverage. For a house with the same area, for example, an external antenna may be used to cover about 130 square meters. For a built-in antenna, 2-3 are needed. For a panel AP,visit one is needed for each room. For a hall or even one is not enough, two are needed. Therefore, you need to roughly estimate how much money you need according to the number of APS you need To do this, first determine your own budget, and then choose the right AP. < 2. Access rate, Belt capacity: at present, the mainstream dual frequency AP mainly includes 300m + 300m 300m + 867m 400m + 867m 450m + 1300m 800m + 1733m. The belt capacity will use the Mu MIMO technology described above, You need to consider whether you need this technology to improve your concurrent capacity. < 3. Coverage: there is no doubt that the coverage of external antenna type > internal antenna > panel AP The power consumption of the scheme is low, and the heating capacity and power consumption of the BCM scheme are huge. If you have more than 4 APS continuously starting up in your normal year,lpda antenna manufacturer the power charge in that year will be enough to buy another AP, so this is an important factor to be considered. thank you for sharing